Qt-embedded-interest Archive, October 2006
Tranfer qt/X11 to qt/embedded
Message 1 in thread
hi all,
I have a qt/X11-3.1 project created using qt-3.1 designer. Now
I want to tranfer the qt-3.1 application on the arm board.
But as i observed that, qt/X11 is not supported for cross-compiling
(plz tell me is it true..). I want to switch the whole qt/X11 project
to qt/Embedded.
Can u tell me the necessary steps to do the switching..
Thanks and Regards,
Niranjan
To unsubscribe - send "unsubscribe" in the subject to qt-embedded-interest-request@xxxxxxxxxxxxx
Message 2 in thread
On Saturday 28 October 2006 14:44, niranjank@xxxxxxxxxxxx wrote:
> hi all,
>
> I have a qt/X11-3.1 project created using qt-3.1 designer. Now
> I want to tranfer the qt-3.1 application on the arm board.
> But as i observed that, qt/X11 is not supported for cross-compiling
> (plz tell me is it true..). I want to switch the whole qt/X11 project
> to qt/Embedded.
>
> Can u tell me the necessary steps to do the switching..
As long as you do not make direct X11 api calls, it should be fairly straight
forward to 'port' a Qt X11 application to Qt Embedded. Basically, only
needing to reconfigure/compile it using the Qt Embedded package.
--
[ signature omitted ]
Message 3 in thread
You should try talking to Trolltech. They'll be able to support your
switch to qt/embedded.
Cheers,
Ben
PS. Why not use qtopia 4.2 instead of 3.1? It works a lot better and you
won't have refresh problems.
> -----Original Message-----
> From: niranjank@xxxxxxxxxxxx [mailto:niranjank@xxxxxxxxxxxx]
> Sent: Saturday, October 28, 2006 6:45 AM
> To: qt-embedded-interest@xxxxxxxxxxxxx
> Subject: Tranfer qt/X11 to qt/embedded
>
> hi all,
>
> I have a qt/X11-3.1 project created using qt-3.1 designer.
> Now I want to tranfer the qt-3.1 application on the arm board.
> But as i observed that, qt/X11 is not supported for
> cross-compiling (plz tell me is it true..). I want to switch
> the whole qt/X11 project to qt/Embedded.
>
> Can u tell me the necessary steps to do the switching..
>
>
> Thanks and Regards,
> Niranjan
>
> To unsubscribe - send "unsubscribe" in the subject to
> qt-embedded-interest-request@xxxxxxxxxxxxx
>
>
To unsubscribe - send "unsubscribe" in the subject to qt-embedded-interest-request@xxxxxxxxxxxxx
