Qt4-preview-feedback Archive, September 2007
Can not edit Labels
Message 1 in thread
Hello Eike,
Just loaded the RC2 QT eclipse and I have experienced an issue that I
can not edit or change the text of a qlabel on the form. I change it
using property editor and it still does not update. Click off the label
and then on the label and the information that I just entered into the
TEXT disappears. Do you know why or how I can edit the label?
Best Regards,
Steve Macumber
Lear Tampa-Test Engineering
smacumber@xxxxxxxx
(813)882-5003
**********************
** LEGAL DISCLAIMER **
**********************
This E-mail message and any attachments may contain
legally privileged, confidential or proprietary
information. If you are not the intended recipient(s),
or the employee or agent responsible for delivery of
this message to the intended recipient(s), you are
hereby notified that any dissemination, distribution
or copying of this E-mail message is strictly
prohibited. If you have received this message in
error, please immediately notify the sender and
delete this E-mail message from your computer.
Message 2 in thread
Hi Steve,
for me, using the property editor works fine. Inline editing doesn't,
though.
Which Linux Distribution were you using? Is that something that is
new in RC2, but worked for you in RC1 ?
Do you experience that problem for all widgets, or only for QLabels?
Does the problem occur only for specific ui-files or with all (could
you try creating a new, empy UI-file via File -> New -> Qt Designer
Form, and try it there)?
++ Eike
On Sep 25, 2007, at 4:08 PM, Macumber, Steven wrote:
> Hello Eike,
>
> Just loaded the RC2 QT eclipse and I have experienced an issue
> that I can not edit or change the text of a qlabel on the form. I
> change it using property editor and it still does not update.
> Click off the label and then on the label and the information that
> I just entered into the TEXT disappears. Do you know why or how I
> can edit the label?
>
> Best Regards,
> Steve Macumber
> Lear Tampa-Test Engineering
> smacumber@xxxxxxxx
> (813)882-5003
>
>
> **********************
> ** LEGAL DISCLAIMER **
> **********************
>
> This E-mail message and any attachments may contain
> legally privileged, confidential or proprietary
> information. If you are not the intended recipient(s),
> or the employee or agent responsible for delivery of
> this message to the intended recipient(s), you are
> hereby notified that any dissemination, distribution
> or copying of this E-mail message is strictly
> prohibited. If you have received this message in
> error, please immediately notify the sender and
> delete this E-mail message from your computer.
To unsubscribe - send "unsubscribe" in the subject to qt4-preview-feedback-request@xxxxxxxxxxxxx
Message 3 in thread
Hello Eike,
I am using the latest rev of Qt eclipse, that I downloaded from (
http://trolltech.com/developer/downloads/qt/eclipse-integration-download
), previously I had installed RC2...
I did not try to use RC1, there were problems with that version when I
loaded that.
I am using the new RedHat 5, eclipse 3.2.2 and CDT 3.1.2....
I tried what you mentioned and this does not work in a new form for
either a widget or a main window form.
The only way that I can change the text of the label is to right click
and choose rich text and then change the label. If I try to change via
the property Editor it will not change.
Best Regards,
Steve Macumber
-----Original Message-----
From: Eike Ziller [mailto:eziller@xxxxxxxxxxxxx]
Sent: Tuesday, September 25, 2007 12:25 PM
To: Macumber, Steven
Cc: qt4-preview-feedback@xxxxxxxxxxxxx
Subject: Re: Can not edit Labels
Hi Steve,
for me, using the property editor works fine. Inline editing doesn't,
though.
Which Linux Distribution were you using? Is that something that is new
in RC2, but worked for you in RC1 ?
Do you experience that problem for all widgets, or only for QLabels?
Does the problem occur only for specific ui-files or with all (could you
try creating a new, empy UI-file via File -> New -> Qt Designer Form,
and try it there)?
++ Eike
On Sep 25, 2007, at 4:08 PM, Macumber, Steven wrote:
> Hello Eike,
>
> Just loaded the RC2 QT eclipse and I have experienced an issue
> that I can not edit or change the text of a qlabel on the form. I
> change it using property editor and it still does not update.
> Click off the label and then on the label and the information that
> I just entered into the TEXT disappears. Do you know why or how I
> can edit the label?
>
> Best Regards,
> Steve Macumber
> Lear Tampa-Test Engineering
> smacumber@xxxxxxxx
> (813)882-5003
>
>
> **********************
> ** LEGAL DISCLAIMER **
> **********************
>
> This E-mail message and any attachments may contain
> legally privileged, confidential or proprietary
> information. If you are not the intended recipient(s),
> or the employee or agent responsible for delivery of
> this message to the intended recipient(s), you are
> hereby notified that any dissemination, distribution
> or copying of this E-mail message is strictly
> prohibited. If you have received this message in
> error, please immediately notify the sender and
> delete this E-mail message from your computer.
To unsubscribe - send "unsubscribe" in the subject to qt4-preview-feedback-request@xxxxxxxxxxxxx
Message 4 in thread
Eike,
I un-installed the QT-Eclipse and reinstalled it(the latest) as
indicated in the instructions and label text edit seemed to work this
time...
Best Regards,
Steve Macumber
-----Original Message-----
From: Eike Ziller [mailto:eziller@xxxxxxxxxxxxx]
Sent: Tuesday, September 25, 2007 12:25 PM
To: Macumber, Steven
Cc: qt4-preview-feedback@xxxxxxxxxxxxx
Subject: Re: Can not edit Labels
Hi Steve,
for me, using the property editor works fine. Inline editing doesn't,
though.
Which Linux Distribution were you using? Is that something that is new
in RC2, but worked for you in RC1 ?
Do you experience that problem for all widgets, or only for QLabels?
Does the problem occur only for specific ui-files or with all (could you
try creating a new, empy UI-file via File -> New -> Qt Designer Form,
and try it there)?
++ Eike
On Sep 25, 2007, at 4:08 PM, Macumber, Steven wrote:
> Hello Eike,
>
> Just loaded the RC2 QT eclipse and I have experienced an issue
> that I can not edit or change the text of a qlabel on the form. I
> change it using property editor and it still does not update.
> Click off the label and then on the label and the information that
> I just entered into the TEXT disappears. Do you know why or how I
> can edit the label?
>
> Best Regards,
> Steve Macumber
> Lear Tampa-Test Engineering
> smacumber@xxxxxxxx
> (813)882-5003
>
>
> **********************
> ** LEGAL DISCLAIMER **
> **********************
>
> This E-mail message and any attachments may contain
> legally privileged, confidential or proprietary
> information. If you are not the intended recipient(s),
> or the employee or agent responsible for delivery of
> this message to the intended recipient(s), you are
> hereby notified that any dissemination, distribution
> or copying of this E-mail message is strictly
> prohibited. If you have received this message in
> error, please immediately notify the sender and
> delete this E-mail message from your computer.
To unsubscribe - send "unsubscribe" in the subject to qt4-preview-feedback-request@xxxxxxxxxxxxx
Message 5 in thread
Eike,
For some reason it stopped working again. I'm also having issues with
the other items that I need to modify, such as the button box...It seems
like some type of lock is set to not allow the form items to be changed.
You can add items to the form but you can not change the item (neither
the previous or the new items).
Best Regards,
Steve Macumber
-----Original Message-----
From: Macumber, Steven [mailto:SMacumber@xxxxxxxx]
Sent: Tuesday, September 25, 2007 2:35 PM
To: qt4-preview-feedback@xxxxxxxxxxxxx
Subject: RE: Can not edit Labels
Eike,
I un-installed the QT-Eclipse and reinstalled it(the latest) as
indicated in the instructions and label text edit seemed to work this
time...
Best Regards,
Steve Macumber
-----Original Message-----
From: Eike Ziller [mailto:eziller@xxxxxxxxxxxxx]
Sent: Tuesday, September 25, 2007 12:25 PM
To: Macumber, Steven
Cc: qt4-preview-feedback@xxxxxxxxxxxxx
Subject: Re: Can not edit Labels
Hi Steve,
for me, using the property editor works fine. Inline editing doesn't,
though.
Which Linux Distribution were you using? Is that something that is new
in RC2, but worked for you in RC1 ?
Do you experience that problem for all widgets, or only for QLabels?
Does the problem occur only for specific ui-files or with all (could you
try creating a new, empy UI-file via File -> New -> Qt Designer Form,
and try it there)?
++ Eike
On Sep 25, 2007, at 4:08 PM, Macumber, Steven wrote:
> Hello Eike,
>
> Just loaded the RC2 QT eclipse and I have experienced an issue
> that I can not edit or change the text of a qlabel on the form. I
> change it using property editor and it still does not update.
> Click off the label and then on the label and the information that I
> just entered into the TEXT disappears. Do you know why or how I can
> edit the label?
>
> Best Regards,
> Steve Macumber
> Lear Tampa-Test Engineering
> smacumber@xxxxxxxx
> (813)882-5003
>
>
> **********************
> ** LEGAL DISCLAIMER **
> **********************
>
> This E-mail message and any attachments may contain legally
> privileged, confidential or proprietary information. If you are not
> the intended recipient(s), or the employee or agent responsible for
> delivery of this message to the intended recipient(s), you are hereby
> notified that any dissemination, distribution or copying of this
> E-mail message is strictly prohibited. If you have received this
> message in error, please immediately notify the sender and delete this
> E-mail message from your computer.
To unsubscribe - send "unsubscribe" in the subject to
qt4-preview-feedback-request@xxxxxxxxxxxxx
To unsubscribe - send "unsubscribe" in the subject to qt4-preview-feedback-request@xxxxxxxxxxxxx
