| Trolltech Home | Qt4-preview-feedback Home | Recent Threads | All Threads | Author | Date | |
| All threads index page 1 | |
I have tried 4.4 with the Visual Studio 2008 compiler and everything seems to compile. However, when I start the assistant or the demo program none of the documentation is available. There is a bunch of *.qdoc files under the src/doc tree. Is there some kind of make command I have to specify to get the documentation created? Theo To unsubscribe - send "unsubscribe" in the subject to qt4-preview-feedback-request@xxxxxxxxxxxxx
T. Landman wrote: >I have tried 4.4 with the Visual Studio 2008 compiler and everything >seems to compile. However, when I start the assistant or the demo >program none of the documentation is available. There is a bunch of >*.qdoc files under the src/doc tree. Is there some kind of make command >I have to specify to get the documentation created? The documentation is pre-generated in the beta 1 packages. If you're trying a snapshot, you have to run: nmake docs -- [ signature omitted ]
Attachment:
signature.asc
Description: This is a digitally signed message part.
Thiago Macieira schreef:
> T. Landman wrote:
>
>> I have tried 4.4 with the Visual Studio 2008 compiler and everything
>> seems to compile. However, when I start the assistant or the demo
>> program none of the documentation is available. There is a bunch of
>> *.qdoc files under the src/doc tree. Is there some kind of make command
>> I have to specify to get the documentation created?
>>
>
> The documentation is pre-generated in the beta 1 packages. If you're
> trying a snapshot, you have to run:
> nmake docs
>
>
With the 20080325 snapshot I get an error that the qdoc3 tool isn't found
(cd
C:\Users\theo\dev\qt-win-commercial-src-4.4.0-snapshot-20080325/tool
s/qdoc3/test && set
QT_BUILD_TREE=C:\Users\theo\dev\qt-win-commercial-src-4.4.0-
snapshot-20080325&& set
QT_SOURCE_TREE=C:\Users\theo\dev\qt-win-commercial-src-4
.4.0-snapshot-20080325&&
C:\Users\theo\dev\qt-win-commercial-src-4.4.0-snapshot-
20080325/tools/qdoc3/debug/qdoc3 -Ddesktopedition
qt-build-docs.qdocconf)
C:\Users\theo\dev\qt-win-commercial-src-4.4.0-snapshot-20080325/tools/qdoc3/debu
g/qdoc3 wordt niet herkend als een interne
of externe opdracht, programma of batchbestand.
NMAKE : fatal error U1077: '(cd' : return code '0x1'
Stop.
I think the problem is that the qdoc3 tool is in the release directory
instead of the debug directory. I copied the qdoc3 from the release to
the debug directory and now it works. I do get a lot of the following,
but I assume these are known issues.
C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-20080325/doc/src/licenses
.qdoc:422: Cannot tie this documentation to anything
[I found a /*! ... */ comment, but there was no topical command
(e.g., '\fn'
, '\page') in the comment and no function definition following the
comment.]
C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-20080325/src/corelib/tool
s/qshareddata.cpp:361: Cannot find 'operator T *(...)' in '\fn'
[I cannot find any function of that name with the specified
signature. Make
sure that the signature is identical to the declaration, including
'const' quali
fiers.]
C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-20080325/src/corelib/tool
s/qshareddata.cpp:367: Cannot find 'operator const T *(...)' in '\fn'
[I cannot find any function of that name with the specified
signature. Make
sure that the signature is identical to the declaration, including
'const' quali
fiers.]
C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-20080325/src/corelib/tool
s/qshareddata.cpp:371: Cannot find 'data(...)' in '\fn'
[I cannot find any function of that name with the specified
signature. Make
sure that the signature is identical to the declaration, including
'const' quali
fiers.]
C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-20080325/doc/src/snippets
/code/src.gui.util.qdesktopservices.cpp:16: Hostile character 0x40
in C++ source
C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-20080325/doc/src/snippets
/code/doc.src.gpl.qdoc:1018: Unterminated C++ character literal
Oops, forgot flat text.
Thiago Macieira schreef:
> T. Landman wrote:
>
>> I have tried 4.4 with the Visual Studio 2008 compiler and everything
>> seems to compile. However, when I start the assistant or the demo
>> program none of the documentation is available. There is a bunch of
>> *.qdoc files under the src/doc tree. Is there some kind of make command
>> I have to specify to get the documentation created?
>>
>
> The documentation is pre-generated in the beta 1 packages. If you're
> trying a snapshot, you have to run:
> nmake docs
>
>
With the 20080325 snapshot I get an error that the qdoc3 tool isn't found
(cd
C:\Users\theo\dev\qt-win-commercial-src-4.4.0-snapshot-20080325/tool
s/qdoc3/test && set
QT_BUILD_TREE=C:\Users\theo\dev\qt-win-commercial-src-4.4.0-
snapshot-20080325&& set
QT_SOURCE_TREE=C:\Users\theo\dev\qt-win-commercial-src-4
.4.0-snapshot-20080325&&
C:\Users\theo\dev\qt-win-commercial-src-4.4.0-snapshot-
20080325/tools/qdoc3/debug/qdoc3 -Ddesktopedition
qt-build-docs.qdocconf)
C:\Users\theo\dev\qt-win-commercial-src-4.4.0-snapshot-20080325/tools/qdoc3/debu
g/qdoc3 wordt niet herkend als een interne
of externe opdracht, programma of batchbestand.
NMAKE : fatal error U1077: '(cd' : return code '0x1'
Stop.
I think the problem is that the qdoc3 tool is in the release directory
instead of the debug directory. I copied the qdoc3 from the release to
the debug directory and now it works. I do get a lot of the following,
but I assume these are known issues.
C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-20080325/doc/src/licenses
.qdoc:422: Cannot tie this documentation to anything
[I found a /*! ... */ comment, but there was no topical command
(e.g., '\fn'
, '\page') in the comment and no function definition following the
comment.]
C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-20080325/src/corelib/tool
s/qshareddata.cpp:361: Cannot find 'operator T *(...)' in '\fn'
[I cannot find any function of that name with the specified
signature. Make
sure that the signature is identical to the declaration, including
'const' quali
fiers.]
C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-20080325/src/corelib/tool
s/qshareddata.cpp:367: Cannot find 'operator const T *(...)' in '\fn'
[I cannot find any function of that name with the specified
signature. Make
sure that the signature is identical to the declaration, including
'const' quali
fiers.]
C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-20080325/src/corelib/tool
s/qshareddata.cpp:371: Cannot find 'data(...)' in '\fn'
[I cannot find any function of that name with the specified
signature. Make
sure that the signature is identical to the declaration, including
'const' quali
fiers.]
C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-20080325/doc/src/snippets
/code/src.gui.util.qdesktopservices.cpp:16: Hostile character 0x40
in C++ source
C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-20080325/doc/src/snippets
/code/doc.src.gpl.qdoc:1018: Unterminated C++ character literal
To unsubscribe - send "unsubscribe" in the subject to qt4-preview-feedback-request@xxxxxxxxxxxxx
Hi all,
As I said in another e-mail sent to this mailing list, the problem is solved
replacing (in the doc.pri file)
win32 {
QT_WINCONFIG = release
CONFIG(debug, debug|release) {
QT_WINCONFIG = release
}
}
With
win32 {
QT_WINCONFIG = release
}
I hope this change will be part of the next snapshot.
Thank you very much for your attention.
Massimo
> With the 20080325 snapshot I get an error that the qdoc3 tool isn't
> found
>
> (cd
> C:\Users\theo\dev\qt-win-commercial-src-4.4.0-snapshot-
> 20080325/tool
> s/qdoc3/test && set
> QT_BUILD_TREE=C:\Users\theo\dev\qt-win-commercial-src-4.4.0-
> snapshot-20080325&& set
> QT_SOURCE_TREE=C:\Users\theo\dev\qt-win-commercial-src-4
> .4.0-snapshot-20080325&&
> C:\Users\theo\dev\qt-win-commercial-src-4.4.0-snapshot-
> 20080325/tools/qdoc3/debug/qdoc3 -Ddesktopedition
> qt-build-docs.qdocconf)
> C:\Users\theo\dev\qt-win-commercial-src-4.4.0-snapshot-
> 20080325/tools/qdoc3/debu
> g/qdoc3 wordt niet herkend als een interne
> of externe opdracht, programma of batchbestand.
> NMAKE : fatal error U1077: '(cd' : return code '0x1'
> Stop.
>
> I think the problem is that the qdoc3 tool is in the release directory
> instead of the debug directory. I copied the qdoc3 from the release to
> the debug directory and now it works. I do get a lot of the following,
> but I assume these are known issues.
>
> C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-
> 20080325/doc/src/licenses
> .qdoc:422: Cannot tie this documentation to anything
> [I found a /*! ... */ comment, but there was no topical command
> (e.g., '\fn'
> , '\page') in the comment and no function definition following the
> comment.]
> C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-
> 20080325/src/corelib/tool
> s/qshareddata.cpp:361: Cannot find 'operator T *(...)' in '\fn'
> [I cannot find any function of that name with the specified
> signature. Make
> sure that the signature is identical to the declaration, including
> 'const' quali
> fiers.]
> C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-
> 20080325/src/corelib/tool
> s/qshareddata.cpp:367: Cannot find 'operator const T *(...)' in
> '\fn'
> [I cannot find any function of that name with the specified
> signature. Make
> sure that the signature is identical to the declaration, including
> 'const' quali
> fiers.]
> C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-
> 20080325/src/corelib/tool
> s/qshareddata.cpp:371: Cannot find 'data(...)' in '\fn'
> [I cannot find any function of that name with the specified
> signature. Make
> sure that the signature is identical to the declaration, including
> 'const' quali
> fiers.]
> C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-
> 20080325/doc/src/snippets
> /code/src.gui.util.qdesktopservices.cpp:16: Hostile character 0x40
> in C++ source
>
> C:/Users/theo/dev/qt-win-commercial-src-4.4.0-snapshot-
> 20080325/doc/src/snippets
> /code/doc.src.gpl.qdoc:1018: Unterminated C++ character literal
>
>
> To unsubscribe - send "unsubscribe" in the subject to qt4-preview-
> feedback-request@xxxxxxxxxxxxx
To unsubscribe - send "unsubscribe" in the subject to qt4-preview-feedback-request@xxxxxxxxxxxxx